Specification

 1.    Shell material for high quality Sheet Molding Compound(SMC), beautiful shape;

 2.    The double structure design, the upper for light optical device wiring layer, and the lower layer for fiber splicing, internal go fine routing clear, easy to operate.

 3.    Capacity and 16 core and 32 core, the standard installation SC adapter, other adepter type you can order.

 4.    The optical light module USES a modular design of the upper, have very strong interchangeability and universal.

 5.    Clearly marked, each core of optical fiber in and distribution are clearly marked.

 6.    The opening Angle is not less than 180 DHS, outdoor hang wall or hang lever installation.

 7.    Has reliable cable fixed, stripping, and protection grounding system.

Ensure that optical fiber, cable in any position bend curvature radius greater than 30mm.

 8.    Outdoor type into cable under a fine; indoor type up and down into the cable, and the upper and lower out fine.

 9.    With temporary tail fiber storage area.

Application:

Optical Fiber Cable Distribution Box (insertion type) used in the terminal access system FTTH, especially suitable for holding bar or hang wall use, is the optical fiber transmission network node and light in the terminal equipment wiring between the ideal equipment, have to optical fiber storage, spectral, wiring, flexible scheduling function.

Performance Index

Insulation resistance: >2 x 104 M / 500V (DC)

Compression: high voltage not less than 3000V(DC), 1 min not breakdown, no fly arc.

Seale performance: indoor light is the type of optical box should reach protective performance GB 4208-2008 in Ip53

Outdoor type of optical light the box protective function should reach 4208-2008 GB of level IP55 requirements. 

Working temperature: -40 ~ +60

Connectors lossincluding insert, repeat, exchange) than 0.5 dB;

Return loss: PC 45 dB, frequency UPC frequency 50 dB, APC quartile 60 dB